Netgear M4100-26G CLI Manual - Page 218

ProSafe M4100 and M7100 Managed Switches The following table explains the output parameters. Term MVR Running MVR multicast VLAN MVR Max Multicast Groups MVR Current multicast groups MVR Query response time MVR Mode Definition MVR running state. It can be enabled or disabled. Current MVR multicast VLAN. It can be in the range from 1 to 4094. The maximum number of multicast groups supported by MVR. The current number of MVR groups allocated. The current MVR query response time. The current MVR mode. It can be compatible or dynamic. Example: (Switch)#show mvr MVR Running TRUE MVR multicast VLAN 1200 MVR Max Multicast Groups 256 MVR Current multicast groups 1 MVR Global query response time........... 10 (tenths of sec) MVR Mode compatible show mvr members This command displays the MVR membership groups allocated. is a valid multicast address in IPv4 dotted notation. Format Mode show mvr members [] Privileged EXEC The following table describes the output parameters. Term MVR Group IP Status Members Definition MVR group multicast IP address. The status of the specific MVR group. It can be active or inactive. The list of ports that participates in the specified MVR group. Example: (switch)#show mvr members MVR Group IP Status 224.1.1.1 INACTIVE Members 0/1, 0/2, 0/3 Multicast VLAN Registration (MVR) 218