Netgear M4100-26G CLI Manual - Page 309

ProSafe M4100 and M7100 Managed Switches the command no max-metric router-lsa on-startup. The command no max-metric router-lsa summary-lsa causes OSPF to send summary LSAs with metrics computed using normal procedures defined in RFC 2328. Format Mode no max-metric router-lsa [on-startup] [summary-lsa] OSPFv2 Router Configuration OSPF Interface Flap Dampening Commands Dampening Use this command to enable IP event dampening on a routing interface. Format Mode dampening [half-life period] [reuse-threshold suppress-threshold max-suppress-time [restart restart-penalty]] Interface Config Parameter Description Half-life period The number of seconds it takes for the penalty to reduce by half. The configurable range is 1-30 seconds. Default value is 5 seconds. Reuse Threshold The value of the penalty at which the dampened interface is restored. The configurable range is 1-20,000. The default value is 1000. Suppress Threshold The value of the penalty at which the interface is dampened. The configurable range is 120,000. The default value is 2000. Max Suppress Time The maximum amount of time (in seconds) an interface can be in suppressed state after it stops flapping. The configurable range is 1-255 seconds. The default value is four times of half-life period. If half-period value is allowed to default, the maximum suppress time defaults to 20 seconds. Restart Penalty Penalty applied to the interface after the device reloads. The configurable range is 1- 20,000. The default value is 2000. no dampening This command disables IP event dampening on a routing interface. Format Mode no dampening Interface Config Routing Commands 309