Netgear M4100-26G CLI Manual - Page 204

ProSafe M4100 and M7100 Managed Switches no bridge aging-time This command sets the forwarding database address aging timeout to the default value. Format Mode no bridge aging-time Global Config show forwardingdb agetime This command displays the timeout for address aging. Default Format Mode 300s show forwardingdb agetime Privileged EXEC Term Definition Address Aging Timeout This parameter displays the address aging timeout for the associated forwarding database. show mac-address-table multicast This command displays the Multicast Forwarding Database (MFDB) information. If you enter the command with no parameter, the entire table is displayed. You can display the table entry for one MAC Address by specifying the MAC address as an optional parameter. Format Mode show mac-address-table multicast Privileged EXEC Term MAC Address Type Component Description Interfaces Forwarding Interfaces Definition A multicast MAC address for which the switch has forwarding and or filtering information. The format is two-digit hexadecimal numbers separated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC address and VLAN ID combination of 8 bytes. The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are added to the table as a result of a learning process or protocol. The component that is responsible for this entry in the Multicast Forwarding Database. Possible values are IGMP Snooping, GMRP, and Static Filtering. The text description of this multicast table entry. The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:). The resultant forwarding list is derived from combining all the component's forwarding interfaces and removing the interfaces that are listed as the static filtering interfaces. Switching Commands 204