Netgear M4100-26G CLI Manual - Page 520

ProSafe M4100 and M7100 Managed Switches The display parameters, when the argument is "switchport" are as follows: Term Definition Packets Received Without Error The total number of packets (including broadcast packets and multicast packets) received by the processor. Broadcast Packets Received The total number of packets received that were directed to the broadcast address. Note that this does not include multicast packets. Packets Received With Error The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. Packets Transmitted Without Error The total number of packets transmitted out of the interface. Broadcast Packets Transmitted The total number of packets that higher-level protocols requested to be transmitted to the Broadcast address, including those that were discarded or not sent. Transmit Packet Errors The number of outbound packets that could not be transmitted because of errors. Address Entries The total number of Forwarding Database Address table entries now active on the Currently In Use switch, including learned and static entries. VLAN Entries The number of VLAN entries presently occupying the VLAN table. Currently In Use Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch were last cleared. show interface counters This command reports key summary statistics for all ports (physical, CPU, and port-channel). Format Mode show interface counters Privileged EXEC The following shows example CLI display output for the command. (Routing) #show interface counters Port InOctets InUcastPkts InMcastPkts InBcastPkts 0/1 0 0 0 0 0/2 0 0 0 0 0/3 15098 0 31 39 0/4 0 0 0 0 0/5 0 0 0 0 0/6 0 0 0 0 0/7 0 0 0 0 0/8 0 0 0 0 0/9 0 0 0 0 0/10 0 0 0 0 0/11 0 0 0 0 Utility Commands 520