Netgear M4100-26G CLI Manual - Page 607
show sflow agent, show sflow pollers, Format, Field, Description, sFlow Version, IP Address
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 607 highlights
ProSafe M4100 and M7100 Managed Switches show sflow agent The sFlow agent collects time-based sampling of network interface statistics and flow-based samples. These are sent to the configured sFlow receivers. Use this command to display the sFlow agent information. Format Mode show sflow agent Privileged EXEC Field sFlow Version IP Address Description Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: MIB Version; Organization; Software Revision where: • MIB Version: '1.3', the version of this MIB. • Organization: Netgear. • Revision: 1.0 The IP address associated with this agent. Example: The following shows example CLI display output for the command. (switch) #show sflow agent sFlow Version 1.3;Netgear;1.0 IP Address 10.131.12.66 show sflow pollers Use this command to display the sFlow polling instances created on the switch. Use "-" for range. Format Mode show sflow pollers Privileged EXEC Field Poller Data Source Receiver Index Poller Interval Description The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only. The sFlowReceiver associated with this sFlow counter poller. The number of seconds between successive samples of the counters associated with this data source. Utility Commands 607