Netgear M4100-26G CLI Manual - Page 373

ProSafe M4100 and M7100 Managed Switches show ipv6 route preferences Use this command to show the preference value associated with the type of route. Lower numbers have a greater preference. A route with a preference of 255 cannot be used to forward traffic. Format Mode show ipv6 route preferences Privileged EXEC Term Local Static OSPF Intra OSPF Inter OSPF External Definition Preference of directly-connected routes. Preference of static routes. Preference of routes within the OSPF area. Preference of routes to other OSPF routes that are outside of the area. Preference of OSPF external routes. show ipv6 route summary This command displays the summary of the routing table. Use all to display the count summary for all routes, including best and non-best routes. Use the command without parameters to display the count summary for only the best routes. When the optional keyword all is given, some statistics, such as the number of routes from each source, include counts for alternate routes. An alternate route is a route that is not the most preferred route to its destination and therefore is not installed in the forwarding table. When this keyword is not given, the output reports for only the best routes. Format Modes show ipv6 route summary [all] • Privileged EXEC • User EXEC Term Connected Routes Static Routes OSPF Routes Reject Routes Number of Prefixes Total Routes Best Routes Definition Total number of connected routes in the routing table. Total number of static routes in the routing table. Total number of routes installed by OSPFv3 protocol. Total number of reject routes installed by all protocols. Summarizes the number of routes with prefixes of different lengths. The total number of routes in the routing table. The number of best routes currently in the routing table. This number counts only the best route to each destination. IPv6 Commands 373