Netgear M4100-26G CLI Manual - Page 274

ProSafe M4100 and M7100 Managed Switches clear ip ospf configuration Use this command to reset the OSPF configuration to factory defaults. Format Mode clear ip ospf configuration Privileged EXEC clear ip ospf counters Use this command to reset global and interface statistics. Format Mode clear ip ospf counters Privileged EXEC clear ip ospf neighbor Use this command to drop the adjacency with all OSPF neighbors. On each neighbor's interface, send a one way hello. Adjacencies might then be reestablished. To drop all adjacencies with a specific router ID, specify the neighbor's Router ID using the optional parameter [neighbor-id]. Format Mode clear ip ospf neighbor [neighbor-id] Privileged EXEC clear ip ospf neighbor interface To drop adjacency with all neighbors on a specific interface, use the optional parameter [slot/port]. To drop adjacency with a specific router ID on a specific interface, use the optional parameter [neighbor-id]. Format Mode clear ip ospf neighbor interface [slot/port] [neighbor-id] Privileged EXEC clear ip ospf redistribution Use this command to flush all self-originated external LSAs. Reapply the redistribution configuration and reoriginate prefixes as necessary. Format Mode clear ip ospf redistribution Privileged EXEC clear ip ospf stub-router OSPF can enter stub router mode due to resource exhaustion (too many LSAs, too many routes, memory allocation failures, and so on). When this happens, the user can get out of this mode by issuing the command after the cause of the overload has been resolved. Routing Commands 274