Netgear M4100-26G CLI Manual - Page 73
GVRP Commands, show garp, set gvrp adminmode
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
ProSafe M4100 and M7100 Managed Switches no set garp timer leaveall This command sets how frequently Leave All PDUs are generated the default and only has an effect when GVRP is enabled. Format Mode no set garp timer leaveall • Interface Config • Global Config show garp This command displays GARP information. Format Mode show garp • Privileged EXEC • User EXEC Term Definition GMRP Admin Mode The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system. GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system. GVRP Commands This section describes the commands you use to configure and view GARP VLAN Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN configuration information, which allows GVRP to provide dynamic VLAN creation on trunk ports and automatic VLAN pruning. Note: If GVRP is disabled, the system does not forward GVRP messages. set gvrp adminmode This command enables GVRP on the system. Default Format Mode disabled set gvrp adminmode Privileged EXEC Switching Commands 73