Netgear M4100-26G CLI Manual - Page 570
ip dhcp excluded-address, ip dhcp ping packets, no option
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 570 highlights
ProSafe M4100 and M7100 Managed Switches period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22 0c). Default Format Mode none option {ascii string | hex [...] | ip [...]} DHCP Pool Config no option This command removes the DHCP Server options. The parameter specifies the DHCP option code. Format Mode no option DHCP Pool Config ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none ip dhcp excluded-address [highaddress] Global Config no ip dhcp excluded-address This command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Format Mode no ip dhcp excluded-address [highaddress] Global Config ip dhcp ping packets Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to a pool address as part of a ping operation. By default the number of packets sent to a pool address is 2, which is the smallest allowed number when sending packets. Setting the number of packets to 0 disables this command. Default 2 Utility Commands 570