Netgear M4100-26G CLI Manual - Page 34

ProSafe M4100 and M7100 Managed Switches • Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionality supported). • Use 802.1w to specify that the switch transmits RST BPDUs rather than MST BPDUs (IEEE 802.1w functionality supported). no spanning-tree forceversion This command sets the Force Protocol Version parameter to the default value. Format Mode no spanning-tree forceversion Global Config spanning-tree forward-time This command sets the Bridge Forward Delay parameter to a new value for the Common and Internal Spanning Tree. The forward-time value is in seconds within a range of 4-30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1". Default Format Mode 15 spanning-tree forward-time Global Config no spanning-tree forward-time This command sets the Bridge Forward Delay parameter for the Common and Internal Spanning Tree to the default value. Format Mode no spanning-tree forward-time Global Config spanning-tree guard This command selects whether loop guard or root guard is enabled on an interface. If neither is enabled, the port operates in accordance with the multiple spanning tree protocol. Default Format Mode none spanning-tree guard { none | root | loop } Interface Config no spanning-tree guard This command disables loop guard or root guard on the interface. Format Mode no spanning-tree guard Interface Config Switching Commands 34