Netgear M4100-26G CLI Manual - Page 230
release dhcp, renew dhcp, show dhcp lease, no ip default-gateway
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
ProSafe M4100 and M7100 Managed Switches no ip default-gateway Use this command to remove the default gateway address from the configuration. Format Mode no ip default-gateway Interface Config release dhcp Use this command to force the DHCPv4 client to release the leased address from the specified interface. Format Mode release dhcp Privileged EXEC renew dhcp Use this command to force the DHCPv4 client to immediately renew an IPv4 address lease on the specified interface. Format Mode renew dhcp {|network-port} Privileged EXEC Note: This command can be used on in-band ports as well as network (out-of-band) port. show dhcp lease Use this command to display a list of IPv4 addresses currently leased from a DHCP server on a specific in-band interface or all in-band interfaces. This command does not apply to service or network ports. Format Mode show dhcp lease [interface ] Privileged EXEC Term Definition IP address, Subnet mask The IP address and network mask leased from the DHCP server. DHCP Lease server The IPv4 address of the DHCP server that leased the address. State State of the DHCPv4 Client on this interface. DHCP transaction The transaction ID of the DHCPv4 Client. ID Routing Commands 230