Netgear M4100-26G CLI Manual - Page 703
IPv6 Management Commands, network ipv6 enable
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 703 highlights
ProSafe M4100 and M7100 Managed Switches Term IPv4 Multicast Routes IPv6 Multicast Routes Description The maximum number of IPv4 multicast forwarding table entries. The maximum number of IPv6 multicast forwarding table entries. Example: #show sdm prefer Current template: Dual IPv4 and IPv6 ARP Entries 4096 IPv4 Unicast Routes 6112 IPv6 NDP Entries 2048 IPv6 Unicast Routes 3072 ECMP Next Hops 4 I Pv4 Multicast Routes 256 IPv6 Multicast Routes 256 IPv6 Management Commands IPv6 Management commands allow a device to be managed via an IPv6 address in a switch or IPv4 routing (that is, independent from the IPv6 Routing package). For Routing/IPv6 builds of Switch CLI dual IPv4/IPv6 operation over the service port is enabled. Switch CLI has capabilities such as: • Static assignment of IPv6 addresses and gateways for the network ports. • The ability to ping an IPv6 link-local address over the network port. • Using IPv6 Management commands, you can send SNMP traps and queries via the network port. • The user can manage a device via the network port (in addition to a routing interface). network ipv6 enable Use this command to enable IPv6 operation on the network port. Default Format Mode enabled network ipv6 enable Privileged EXEC no network ipv6 enable Use this command to disable IPv6 operation on the network port. Format Mode no network ipv6 enable Privileged EXEC Management Commands 703