Netgear M4100-26G CLI Manual - Page 386

ProSafe M4100 and M7100 Managed Switches area nssa no-summary (OSPFv3) This command configures the NSSA so that summary LSAs are not advertised into the NSSA. Format Mode area nssa no-summary Router OSPFv3 Config no area nssa no-summary (OSPFv3) This command disables nssa from the summary LSAs. Format Mode no area nssa no-summary Router OSPF Config area nssa translator-role (OSPFv3) This command configures the translator role of the NSSA. A value of always causes the router to assume the role of the translator the instant it becomes a border router and a value of candidate causes the router to participate in the translator election process when it attains border router status. Format Mode area nssa translator-role {always | candidate} Router OSPFv3 Config no area nssa translator-role (OSPFv3) This command disables the nssa translator role from the specified area id. Format Mode no area nssa translator-role {always | candidate} Router OSPF Config area nssa translator-stab-intv (OSPFv3) This command configures the translator of the NSSA. The is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. Format Mode area nssa translator-stab-intv Router OSPFv3 Config IPv6 Commands 386