Netgear M4100-26G CLI Manual - Page 647

ProSafe M4100 and M7100 Managed Switches Access Commands Use the commands in this section to close remote connections or to view information about connections to the system. disconnect Use the disconnect command to close HTTP, HTTPS, Telnet, or SSH sessions. Use all to close all active sessions, or use to specify the session ID to close. To view the possible values for , use the show loginsession command. Format Mode disconnect { | all} Privileged EXEC show loginsession Use this command to display current Telnet and serial port connections to the switch. Format Mode show loginsession Privileged EXEC Term ID User Name Connection From Idle Time Session Time Session Type Definition Login Session ID. The name the user entered to log on to the system. IP address of the remote client machine or EIA-232 for the serial port connection. Time this session has been idle. Total time this session has been connected. Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH. User Account Commands This section describes the commands you use to add, manage, and delete system users. The 7000 series software has two default users: admin and guest. The admin user can view and configure system settings, and the guest user can view settings. Note: You cannot delete the admin user. There is only one user allowed with read/write privileges. You can configure up to five read-only users on the system. Management Commands 647