Netgear M4100-26G CLI Manual - Page 695
tacacs-server keystring, tacacs-server source interface, no tacacs-server key
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 695 highlights
ProSafe M4100 and M7100 Managed Switches keyword. In the show running config command's display, these secret keys are displayed in encrypted format. You cannot show these keys in plain text format. Format Mode tacacs-server key [ | encrypted ] Global Config no tacacs-server key Use the no tacacs-server key command to disable the authentication and encryption key for all TACACS+ communications between the switch and the TACACS+ daemon. The parameter has a range of 0-128 characters This key must match the key used on the TACACS+ daemon. Format Mode no tacacs-server key Global Config tacacs-server keystring Use this command to set the global authentication encryption key used for all TACACS+ communications between the TACACS+ server and the client. Format Mode tacacs-server keystring Global Config tacacs-server source interface Use this command in Global Configuration mode to configure the global source interface (Source IP selection) for all TACACS+ communications between the TACACS+ client and the server. Format Mode tacacs-server source-interface { | loopback | VLAN } Global Config Parameter slot/port loopback-id vlan-id Description The unit identifier assigned to the switch. The loopback interface. The range of the loopback ID is 0-7. The vlan id. The range of the vlan ID is 1-4,093. Management Commands 695