Netgear M4100-26G CLI Manual - Page 648

ProSafe M4100 and M7100 Managed Switches username Use this command to add a new user to the local user database. The default privilege level is 1. Using the encrypted keyword allows the administrator to transfer local user passwords between devices without having to know the passwords. When the password parameter is used along with encrypted parameter, the password must be exactly 128 hexadecimal characters in length. If the password strength feature is enabled, this command checks for password strength and returns an appropriate error if it fails to meet the password strength criteria. Giving the optional parameter override-complexity-check disables the validation of the password strength. Format Mode username name {password password [encrypted [override-complexity-check] | level level [encrypted [override-complexity-check]] | override-complexity-check]} | {level level [override-complexity-check] password} Global Config Term Definition Name The name of the user, up to 32 characters. Password The password for the users 8-64 characters. This value can be zero if the no passwords min-length command has been executed. The special characters allowed in the password include level Specifies the user level. If not specified, the privilege level is 1. Level 0 can be assigned by a level 15 user to another user to suspend that user's access. Range 0-15. Enter access level 1 for Read Access or 15 for Read/Write Access. encrypted Encrypted password you enter, copied from another device configuration. override-compl Disables the validation of the password strength. exity-check no username Use this command to remove a user account. Format Mode no username Global Config Note: You cannot delete the "admin" user account. Management Commands 648