Netgear M4100-26G CLI Manual - Page 538
show logging buffered, show logging hosts, show logging traplogs, Format, Buffered, In-Memory, Logging
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 538 highlights
ProSafe M4100 and M7100 Managed Switches show logging buffered This command displays buffered logging (system startup and system operation logs). Format Mode show logging buffered Privileged EXEC Term Buffered (In-Memory) Logging Buffered Logging Wrapping Behavior Buffered Log Count Definition Shows whether the In-Memory log is enabled or disabled. The behavior of the In Memory log when faced with a log full situation. The count of valid entries in the buffered log. show logging hosts This command displays all configured logging hosts. Format Mode show logging hosts Privileged EXEC Term Host Index IP Address / Hostname Severity Level Port Host Status Definition (Used for deleting hosts.) IP address or hostname of the logging host. The minimum severity to log to the specified address. The possible values are emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). The server port number, which is the port on the local host from which syslog messages are sent. The state of logging to configured syslog hosts. If the status is disable, no logging occurs. show logging traplogs This command displays SNMP trap events and statistics. Format Mode show logging traplogs Privileged EXEC Utility Commands 538