Netgear M4100-26G CLI Manual - Page 16

ProSafe M4100 and M7100 Managed Switches Table 6. CLI Mode Access and Exit (Continued) Command Mode Access Method Stack Global Config Mode From the Global Config mode, enter the stack command. ARP Access-List Config Mode From the Global Config mode, enter the arp access-list command. Exit or Access Previous Mode To exit to the Global Config mode, enter the exit command. To return to the Privileged EXEC mode, enter Ctrl-Z. To exit to the Global Config mode, enter the exit command. To return to the Privileged EXEC mode, enter Ctrl-Z. Command Completion and Abbreviation Command completion finishes spelling the command when you type enough letters of a command to uniquely identify the command keyword. Once you have entered enough letters, press the SPACEBAR or TAB key to complete the word. Command abbreviation allows you to execute a command when you have entered there are enough letters to uniquely identify the command. You must enter all of the required keywords and parameters before you enter the command. CLI Error Messages If you enter a command and the system is unable to execute it, an error message appears. Table 7 describes the most common CLI error messages. Table 7. CLI Error Messages Message Text % Invalid input detected at '^' marker. Command not found / Incomplete command. Use a question mark (?) to list commands. Ambiguous command Description Indicates that you entered an incorrect or unavailable command. The carat (^) shows where the invalid text is detected. This message also appears if any of the parameters or values are not recognized. Indicates that you did not enter the required keywords or values. Indicates that you did not enter enough letters to uniquely identify the command. Using the Command-Line Interface 16