Netgear M4100-26G CLI Manual - Page 71

ProSafe M4100 and M7100 Managed Switches Term Private -vlan type Primary Secondary Type Ports Definition Displays information about the configured private VLANs Displays only private VLAN ID and its type. Displays primary VLAN ID Displays secondary VLAN ID Displays secondary VLAN type Displays ports which are associated with a private VLAN show interface ethernet switchport This command displays the private-VLAN mapping information for the switch interfaces. Format Mode show interface ethernet switchport • Privileged EXEC • User EXEC Term Private-vlan host-association Private-vlan mapping Definition Displays VLAN association for the private-VLAN host ports. Displays VLAN mapping for the private-VLAN promiscuous ports GARP Commands This section describes the commands you use to configure Generic Attribute Registration Protocol (GARP) and view GARP status. The commands in this section affect both GARP VLAN Registration Protocol (GVRP) and Garp Multicast Registration Protocol (GMRP). GARP is a protocol that allows client stations to register with the switch for membership in VLANS (by using GVMP) or multicast groups (by using GVMP). set garp timer join This command sets the GVRP join time for one port (Interface Config mode) or all (Global Config mode) and per GARP. Join time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership for a VLAN or multicast group. This command has an effect only when GVRP is enabled. The time is from 10 to 100 (centiseconds). The value 20 centiseconds is 0.2 seconds. Default Format Mode 20 set garp timer join • Interface Config • Global Config Switching Commands 71