Netgear M4100-26G CLI Manual - Page 197

ProSafe M4100 and M7100 Managed Switches Note: Some applications mirror source and destination L4 ports - RIP for example uses 520 for both. If you enable dos-control l4port, applications such as RIP may experience packet loss which would render the application inoperable. Default Format Mode disabled dos-control l4port Global Config no dos-control l4port This command disables L4 Port Denial of Service protections. Format Mode no dos-control l4port Global Config dos-control icmp This command enables Maximum ICMP Packet Size Denial of Service protections. If the mode is enabled, Denial of Service prevention is active for this type of attack. If ICMP Echo Request (PING) packets ingress having a size greater than the configured value, the packets will be dropped if the mode is enabled. Default Format Mode disabled dos-control icmp [] Global Config no dos-control icmp This command disables Maximum ICMP Packet Size Denial of Service protections. Format Mode no dos-control icmp Global Config dos-control smacdmac This command enables Source MAC address = Destination MAC address (SMAC=DMAC) Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for Switching Commands 197