Netgear M4100-26G CLI Manual - Page 560

ProSafe M4100 and M7100 Managed Switches clock set This command sets the system time and date. Format Mode clock set clock set Global Config clock summer-time recurring Use the clock summer-time recurring command to set the summertime offset to UTC recursively every year. If the optional parameters are not specified, they are read as either '0' or '\0', as appropriate. Use the following parameters to configure the summer-time. • USA-the US Daylight saving time setting is used (Start --- March, 2nd sunday 02:00 AM, End --- Nov, 1st sunday, 2:00 AM) • EU-the European Union Daylight savings time is used (Start --- March, 5th Sunday 02:00 AM, End --- October, 5th Sunday, 3:00 AM) • week-Week of the month. (Range: 1-5, first, last) • day-Day of the week. (Range: The first three letters by name; sun, for example.) • month-Month. (Range: The first three letters by name; jan, for example.) • hh:mm-Time in 24-hour format in hours and minutes. (Range: hh:0-23, mm: 0-59) • offset-Number of minutes to add during the summertime. (Range:1-1440) • acronym-The acronym for the time zone to be displayed when summertime is in effect. (Range: Up to four characters) Format Mode clock summer-time recurring {USA | EU | {week day month hh:mm week day month hh:mm}} [offset offset ] [zone acronym] Global Config For example: (Switch)(Config)# clock summer-time recurring 1 sun jan 00:10 2 mon mar 10:00 offset 1 zone ABC clock summer-time date Use the clock summer-time date command to set the summertime offset to UTC. If the optional parameters are not specified, they are read as either '0' or '\0', as appropriate. • date-Day of the month. (Range: 1-31) • month-Month. (Range: The first three letters by name; jan, for example.) • year-Year. (Range: 2000-2097) • hh:mm-Time in 24-hour format in hours and minutes. (Range: hh: 0-23, mm: 0-59) Utility Commands 560