Netgear M4100-26G CLI Manual - Page 175

ProSafe M4100 and M7100 Managed Switches show port-security static This command displays the statically locked MAC addresses for port. Format Mode show port-security static [lag | ] Privileged EXEC Term MAC Address Definition MAC Address of statically locked MAC. show port-security violation This command displays the source MAC address of the last packet discarded on a locked port. Format Mode show port-security violation [lag | ] Privileged EXEC Term MAC Address Definition MAC Address of discarded packet on locked port. LLDP (802.1AB) Commands This section describes the command you use to configure Link Layer Discovery Protocol (LLDP), which is defined in the IEEE 802.1AB specification. LLDP allows stations on an 802 LAN to advertise major capabilities and physical descriptions. The advertisements allow a network management system (NMS) to access and display this information. lldp transmit Use this command to enable the LLDP advertise capability. Default Format Mode enabled lldp transmit Interface Config no lldp transmit Use this command to return the local data transmission capability to the default. Format Mode no lldp transmit Interface Config Switching Commands 175