Netgear M4100-26G CLI Manual - Page 164
set mld maxresponse, set mld mcrtexpiretime, no set groupmembership-interval
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
ProSafe M4100 and M7100 Managed Switches Format Mode set mld groupmembership-interval vlanid 2-3600 • Interface Config • Global Config • VLAN Mode no set groupmembership-interval Use this command to set the MLDv2 Group Membership Interval time to the default value. Format Mode no set mld groupmembership-interval • Interface Config • Global Config • VLAN Mode set mld maxresponse Use this command to set the MLD Maximum Response time for the system, on a particular interface or VLAN. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than the MLD Query Interval time value. The range is 1-65 seconds. Default Format Mode 10 seconds set mld maxresponse 1-65 • Global Config • Interface Config • VLAN Mode no set mld maxresponse Use this command to set the max response time (on the interface or VLAN) to the default value. Format Mode no set mld maxresponse • Global Config • Interface Config • VLAN Mode set mld mcrtexpiretime Use this command to set the Multicast Router Present Expiration time. The time is set for the system, on a particular interface or VLAN. This is the amount of time in seconds that a switch waits for a query to be received on an interface before the interface is removed from the list of Switching Commands 164