Netgear M4100-26G CLI Manual - Page 137
show ip dhcp snooping binding, Interface: Restrict the output based on a specific interface.
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
ProSafe M4100 and M7100 Managed Switches 0/1 Yes No 0/2 No Yes 0/3 No Yes 0/4 No No 0/6 No No show ip dhcp snooping binding Use this command to display the DHCP Snooping binding entries. To restrict the output, use the following options: • Dynamic: Restrict the output based on DCHP snooping. • Interface: Restrict the output based on a specific interface. • Static: Restrict the output based on static entries. • VLAN: Restrict the output based on VLAN. Format Mode show ip dhcp snooping binding [{static/dynamic}] [interface slot/port] [vlan id] • Privileged EXEC • User EXEC Term MAC Address IP Address VLAN Interface Type Lease (sec) Definition Displays the MAC address for the binding that was added. The MAC address is the key to the binding database. Displays the valid IP address for the binding rule. The VLAN for the binding rule. The interface to add a binding into the DHCP snooping interface. Binding type; statically configured from the CLI or dynamically learned. The remaining lease time for the entry. Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snooping binding Total number of bindings: 2 MAC Address 00:02:B3:06:60:80 00:0F:FE:00:13:04 IP Address -----------210.1.1.3 210.1.1.4 VLAN ---- 10 10 Interface --------0/1 0/1 Type Lease (Secs 86400 86400 Switching Commands 137