Netgear M4100-26G CLI Manual - Page 277

ProSafe M4100 and M7100 Managed Switches external-lsdb-limit (OSPF) This command configures the external LSDB limit for OSPF. If the value is -1, there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit, the router enters overflow state. The router never holds more than the external LSDB limit non-default AS-external-LSAs in it database. The external LSDB limit must be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. The range for limit is -1 to 2147483647. Default Format Mode -1 external-lsdb-limit Router OSPF Config no external-lsdb-limit This command configures the default external LSDB limit for OSPF. Format Mode no external-lsdb-limit Router OSPF Config log-adjacency-changes To enable logging of OSPFv2 neighbor state changes, use this command in router configuration mode. State changes are logged with INFORMATIONAL severity. Default Format Mode Adjacency state changes are logged, but without the detail option. log-adjacency-changes [detail] OSPFv2 Router Configuration Parameter detail Description (Optional) When this keyword is specified, all adjacency state changes are logged. Otherwise, OSPF only logs transitions to FULL state and when a backwards transition occurs. no log-adjacency-changes Use the no form of the command to disable state change logging. Format Mode no log-adjacency-changes [detail] OSPFv2 Router Configuration ip ospf authentication This command sets the OSPF Authentication Type and Key for the specified interface. The value of is either none, simple, or encrypt. The is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. The Routing Commands 277