Netgear M4100-26G CLI Manual - Page 609

ProSafe M4100 and M7100 Managed Switches Field Sampler Data Source Receiver Index Packet Sampling Rate Max Header Size Description The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only. The sFlowReceiver configured for this sFlow sampler. The statistical sampling rate for packet sampling from this source. The maximum number of bytes that should be copied from a sampled packet to form a flow sample. Software License Commands License commands allow you to configure advanced features on some layer2 managed switches. The following table lists the software license matrix for the layer2 managed switches. For details, see Licensing and Command Support on page 8. Switch Managed Switches IPv4 Routing Licensed IPv6 Routing Licensed IP Multicast Licensed Note: The software license allows the user to download a license file only on the Master unit. The file cannot be downloaded on a Slave unit. There are two options to download the license file to the switch: • Use the Copy command to download the license file through the CLI. • Go to the Maintenance > Download page to download the licence file through the GUI. show license This command displays the license status. License Date indicates the date of the license. License Status indicates whether license is active or inactive. Format Mode show license Privileged EXEC Example: The following shows example CLI display output for the command. (Managed Switches) #show license License date : Apr-9-2010 License copy : 1 License Status: Active Description : License key is active. Utility Commands 609