Netgear M4100-26G CLI Manual - Page 384
ipv6 ospf transmit-delay, ipv6 router ospf, area default-cost OSPFv3, area nssa OSPFv3
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 384 highlights
ProSafe M4100 and M7100 Managed Switches ipv6 ospf transmit-delay This command sets the OSPF Transit Delay for the specified interface. The transmit delay is specified in seconds. In addition, it sets the estimated number of seconds it takes to transmit a link state update packet over this interface. Valid values for range from 1 to 3600 (1 hour). Default Format Mode 1 ipv6 ospf transmit-delay Interface Config no ipv6 ospf transmit-delay This command sets the default OSPF Transit Delay for the specified interface. Format Mode no ipv6 ospf transmit-delay Interface Config ipv6 router ospf Use this command to enter Router OSPFv3 Config mode. Format Mode ipv6 router ospf Global Config area default-cost (OSPFv3) This command configures the monetary default cost for the stub area. The operator must specify the area id and an integer value between 1-16777215. Format Mode area default-cost Router OSPFv3 Config area nssa (OSPFv3) This command configures the specified areaid to function as an NSSA. Format Mode area nssa Router OSPFv3 Config IPv6 Commands 384