Netgear M4100-26G CLI Manual - Page 85

ProSafe M4100 and M7100 Managed Switches no dot1x dynamic-vlan enable Use this command to disable the switch from creating VLANs dynamically when a RADIUS assigned VLAN does not exist in the switch. Format Mode no dot1x dynamic-vlan enable Global Config dot1x system-auth-control monitor Use this command to enable the 802.1X monitor mode on the switch. The purpose of Monitor mode is to help troubleshoot port-based authentication configuration issues without disrupting network access for hosts connected to the switch. In Monitor mode, a host is granted network access to an 802.1X-enabled port even if it fails the authentication process. The results of the process are logged for diagnostic purposes. Format Mode Default dot1x system-auth-control monitor Global Config Disabled no dot1x system-auth-control monitor Use this command to disable the 802.1X monitor on the switch. Format Mode no dot1x system-auth-control monitor Global Config show dot1x authentication-history This command displays 802.1X authentication events and information during successful and unsuccessful Dot1x authentication process for all interfaces or the specified interface. Use the optional keywords to display only failure authentication events in summary or in detail. Format Mode show dot1x authentication-history {slot/port | all} [failedauth-only] [detail] Privileged EXEC Term Definition Time Stamp The exact time at which the event occurs. Interface Physical Port on which the event occurs. Mac-Address The supplicant/client MAC address. VLAN assigned The VLAN assigned to the client/port on authentication. Switching Commands 85