Netgear M4100-26G CLI Manual - Page 140
show ip verify source, show ip source binding
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
ProSafe M4100 and M7100 Managed Switches show ip verify source Use this command to display the IPSG configurations on all ports. Format Mode show ip verify source • Privileged EXEC • User EXEC Term Interface Filter Type IP Address MAC Address VLAN Definition Interface address in slot/port format. Is one of two values: • ip-mac: User has configured MAC address filtering on this interface. • ip: Only IP address filtering on this interface. IP address of the interface If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all." The VLAN for the binding rule. Example: The following shows example CLI display output for the command. (switch) #show ip verify source Interface --------- 0/1 0/1 Filter Type ----------- ip-mac ip-mac IP Address 210.1.1.3 210.1.1.4 MAC Address 00:02:B3:06:60:80 00:0F:FE:00:13:04 Vlan ----- 10 10 show ip source binding This command displays the IPSG bindings. Format Mode show ip source binding [{static/dynamic}] [interface slot/port] [vlan id] • Privileged EXEC • User EXEC Term MAC Address IP Address Type Definition The MAC address for the entry that is added. The IP address of the entry that is added. Entry type; statically configured from CLI or dynamically learned from DHCP Snooping. Switching Commands 140