Netgear M4100-26G CLI Manual - Page 662
aaa accounting, no aaa authentication dot1x
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 662 highlights
ProSafe M4100 and M7100 Managed Switches specified as an authentication method after radius, no authentication is used if the radius server is down. Format Mode aaa authentication dot1x default method1 Global Config method1: At least one from the following table: Keyword local none radius ias Description Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the internal authentication server users database for authentication. no aaa authentication dot1x Use this command to remove the authentication at login. Format Mode no aaa authentication dot1x default Global Config aaa accounting The command creates an accounting method list. This list is identified by "default" or a user-specified "list_name." Accounting records, when enabled for a line-mode, can be sent at both the beginning and at the end (start-stop), or only at the end (stop-only). If "none" is specified, accounting is disabled for the specified list. If "tacacs" is specified as the Accounting method, Accounting records are notified to a TACACS+ server. If "radius" is the specified Accounting method, Accounting records are notified to a RADIUS server. For the same set of accounting type and list name, the administrator can change the record type or the methods list without having to first delete the previous configuration. Note the following: • A maximum of five Accounting Method Lists can be created for each exec and commands type. • The same list-name can be used for both exec and commands Accounting type. • AAA Accounting for commands with RADIUS as the Accounting method is not supported. Format Mode aaa accounting {exec | commands } {default | list_name} {start-stop | stop-only |none} method1 [method2...] Global Config Management Commands 662