Netgear M4100-26G CLI Manual - Page 454

ProSafe M4100 and M7100 Managed Switches no class-map This command eliminates an existing DiffServ class. The is the name of an existing DiffServ class. (The class name 'default' is reserved and is not allowed here.) This command might be issued at any time; if the class is currently referenced by one or more policies or by any other class, the delete action fails. Format Mode no class-map Global Config class-map rename This command changes the name of a DiffServ class. The is the name of an existing DiffServ class. The parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class. Default Format Mode none class-map rename Global Config match ethertype This command adds to the specified class definition a match condition based on the value of the ethertype. The value is specified as one of the following keywords: appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom ethertype value in the range of 0x0600-0xFFFF. Format Mode match ethertype { | custom } Class-Map Config Ipv6-Class-Map Config match any This command adds to the specified class definition a match condition whereby all packets are considered to belong to the class. Default Format Mode none match any Class-Map Config Ipv6-Class-Map Config Quality of Service (QoS) Commands 454