Netgear M4100-26G CLI Manual - Page 477

ProSafe M4100 and M7100 Managed Switches no mac access-group This command removes a MAC ACL identified by from the interface in a given direction. Format Modes no mac access-group {{control-plane|in|out} vlan vlan-id {in|out}} • Global Config • Interface Config show mac access-lists This command displays a MAC access list and all of the rules that are defined for the MAC ACL. Use the [name] parameter to identify a specific MAC ACL to display. Format Mode show mac access-lists [name] Privileged EXEC Term Definition Rule Number The ordered rule number identifier defined within the MAC ACL. Action The action associated with each rule. The possible values are Permit or Deny. Source MAC Address The source MAC address for this rule. Destination The destination MAC address for this rule. MAC Address Ethertype The Ethertype keyword or custom value for this rule. VLAN ID The VLAN identifier value or range for this rule. COS The COS (802.1p) value for this rule. Log Displays when you enable logging for the rule. Assign Queue The queue identifier to which packets matching this rule are assigned. Mirror Interface The slot/port to which packets matching this rule are copied. Redirect Interface The slot/port to which packets matching this rule are forwarded. Time Range name Displays the name of the time-range if the MAC ACL rule has referenced a time range. Rule Status Status (Active/Inactive) of the MAC ACL rule Quality of Service (QoS) Commands 477