Netgear M4100-26G CLI Manual - Page 174

ProSafe M4100 and M7100 Managed Switches no port-security mac-address sticky The no form removes the sticky mode. The sticky MAC address can be deleted by using the command no port-security mac-address . Format Modes no port-security mac-address sticky [ ] • Global Config • Interface Config show port-security This command displays the port-security settings. If you do not use a parameter, the command displays the settings for the entire system. Use the optional parameters to display the settings on a specific interface or on all interfaces. Format Mode show port-security [{ | all}] Privileged EXEC Term Admin Mode Definition Port Locking mode for the entire system. This field displays if you do not supply any parameters. For each interface, or for the interface you specify, the following information appears: Term Admin Mode Dynamic Limit Static Limit Violation Trap Mode Definition Port Locking mode for the Interface. Maximum dynamically allocated MAC Addresses. Maximum statically allocated MAC Addresses. Whether violation traps are enabled. show port-security dynamic This command displays the dynamically locked MAC addresses for the port. Format Mode show port-security dynamic [lag | ] Privileged EXEC Term MAC Address Definition MAC Address of dynamically locked MAC. Switching Commands 174