Netgear M4100-26G CLI Manual - Page 409

ProSafe M4100 and M7100 Managed Switches Term Definition Events Number of times this neighbor relationship has changed state, or an error has occurred. Retransmission An integer representing the current length of the retransmission queue of the specified Queue Length neighbor router Id of the specified interface. show ipv6 ospf range This command displays information about the area ranges for the specified . The identifies the OSPF area whose ranges are being displayed. Format Modes show ipv6 ospf range • Privileged EXEC • User EXEC Term Area ID IP Address Lsdb Type Advertisement Definition The area id of the requested OSPF area. An IP address which represents this area range. The type of link advertisement associated with this area range. The status of the advertisement: enabled or disabled. show ipv6 ospf stub table This command displays the OSPF stub table. The information below will only be displayed if OSPF is initialized on the switch. Format Modes show ipv6 ospf stub table • Privileged EXEC • User EXEC Term Definition Area ID A 32-bit identifier for the created stub area. Type of Service Type of Service associated with the stub metric. For this release, Normal TOS is the only supported type. Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the Type of Service among the interfaces to other areas. The OSPF cost for a route is a function of the metric value. Import Controls the import of summary LSAs into stub areas. Summary LSA IPv6 Commands 409