Netgear M4100-26G CLI Manual - Page 147
show arp access-list, name as the argument will display only the rules in that ARP ACL.
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
ProSafe M4100 and M7100 Managed Switches command displays the values for that interface whether the interface is enabled for DAI or not. Format Mode show ip arp inspection interfaces [slot/port] • Privileged EXEC • User EXEC Term Interface Trust State Rate Limit Burst Interval Definition The interface ID for each displayed row. Whether the interface is trusted or untrusted for DAI. The configured rate limit value in packets per second. The configured burst interval value in seconds. Example: The following shows example CLI display output for the command. (Switch) #show ip arp inspection interfaces Interface Trust State Rate Limit Burst Interval (pps) (seconds) 0/1 Untrusted 15 1 0/2 Untrusted 10 10 show arp access-list Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL name as the argument will display only the rules in that ARP ACL. Format Mode show arp access-list [acl-name] • Privileged EXEC • User EXEC Example: The following shows example CLI display output for the command. (Switch) #show arp access-list ARP access list H2 permit ip host 1.1.1.1 mac host 00:01:02:03:04:05 permit ip host 1.1.1.2 mac host 00:03:04:05:06:07 ARP access list H3 ARP access list H4 permit ip host 2.1.1.2 mac host 00:03:04:05:06:08 Switching Commands 147