Netgear M4100-26G CLI Manual - Page 681
authorization network radius, radius accounting mode, radius server attribute
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 681 highlights
ProSafe M4100 and M7100 Managed Switches authorization network radius Use this command to enable the switch to accept VLAN assignment by the radius server. Default Format Mode disable authorization network radius Global Config no authorization network radius Use this command to disable the switch to accept VLAN assignment by the radius server. Format Mode no authorization network radius Global Config radius accounting mode Use this command to enable the RADIUS accounting function. Default Format Mode disabled radius accounting mode Global Config no radius accounting mode Use this command to set the RADIUS accounting function to the default value (disabled). Format Mode no radius accounting mode Global Config radius server attribute Use this command to specify the RADIUS client to use the NAS-IP Address attribute in the RADIUS requests. If the specific IP address is configured while enabling this attribute, the RADIUS client uses that IP address while sending NAS-IP-Address attribute in RADIUS communication. Format Mode radius server attribute [] Global Config Term 4 ipaddr Definition NAS-IP-Address attribute to be used in RADIUS requests. The IP address of the server. Management Commands 681