Netgear M4100-26G CLI Manual - Page 69

ProSafe M4100 and M7100 Managed Switches Term host-association mapping primary-vlan-id secondary-vlan-id add remove secondary-vlan-list Definition Defines VLAN association for community or host ports. Defines the private VLAN mapping for promiscuous ports. Primary VLAN ID of a private VLAN. Secondary (isolated or community) VLAN ID of a private VLAN. Associates the secondary VLAN with the primary one. Deletes the secondary VLANs from the primary VLAN association. A list of secondary VLANs to be mapped to a primary VLAN. no switchport private-vlan This command is used to remove the private-VLAN association or mapping from the port. Format Mode no switchport private-vlan {host-association | mapping} Interface Config switchport mode private-vlan This command is used to configure a port as a promiscuous or host private VLAN port. Note that the properties of each mode can be configured even when the switch is not in that mode. However, they will only be applicable once the switch is in that particular mode. Format Mode Default switchport mode private-vlan {host | promiscuous} Interface Config General Term host promiscuous Definition Configures an interface as a private VLAN host port. It can be either isolated or community port depending on the secondary VLAN it is associated with. Configures an interface as a private VLAN promiscuous port. The promiscuous ports are members of the primary VLAN. no switchport mode This command is used to remove the private-VLAN association or mapping from the port. Format Mode no switchport mode private-vlan Interface Config Switching Commands 69