Netgear M4100-26G CLI Manual - Page 289
LSA High Water, LSAs Received
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
ProSafe M4100 and M7100 Managed Switches Term Definition ASBR Status Reflects whether the ASBR mode is enabled or disabled. Enable implies that the router is an autonomous system border router. The router automatically becomes an ASBR when it is configured to redistribute routes learnt from other protocols. The possible values for the ASBR status is enabled (if the router is configured to redistribute routes learned by other protocols) or disabled (if the router is not configured for the same). Stub Router When OSPF runs out of resources to store the entire link state database, or any other state information, OSPF goes into stub router mode. As a stub router, OSPF reoriginates its own router LSAs, setting the cost of all nonstub interfaces to infinity. To restore OSPF to normal operation, disable and reenable OSPF. Exit Overflow Interval The number of seconds that, after entering overflow state, a router will attempt to leave overflow state. External LSDB Overflow When the number of non-default external LSAs exceeds the configured limit, External LSDB Limit, OSPF goes into LSDB overflow state. In this state, OSPF withdraws all of its self-originated non-default external LSAs. After the Exit Overflow Interval, OSPF leaves the overflow state, if the number of external LSAs has been reduced. External LSA Count The number of external (LS type 5) link-state advertisements in the link-state database. External LSA Checksum The sum of the LS checksums of external link-state advertisements contained in the link-state database. AS_OPAQUE LSA Count Shows the number of AS Opaque LSAs in the link-state database. AS_OPAQUE LSA Checksum Shows the sum of the LS Checksums of AS Opaque LSAs contained in the link-state database. New LSAs Originated The number of new link-state advertisements that have been originated. LSAs Received The number of link-state advertisements received determined to be new instantiations. LSA Count The total number of link state advertisements currently in the link state database. Maximum Number of LSAs The maximum number of LSAs that OSPF can store. LSA High Water Mark The maximum size of the link state database since the system started. Retransmit List The total number of LSAs waiting to be acknowledged by all neighbors. An LSA might be Entries pending acknowledgment from more than one neighbor. Maximum Number of Retransmit Entries The maximum number of LSAs that can be waiting for acknowledgment at any given time. Retransmit Entries High Water Mark The highest number of LSAs that have been waiting for acknowledgment. External LSDB Limit The maximum number of non-default AS-external-LSAs entries that can be stored in the link-state database. Default Metric Default value for redistributed routes. Routing Commands 289