Netgear M4100-26G CLI Manual - Page 527

ProSafe M4100 and M7100 Managed Switches Term VLAN Deletes Time Since Counters Last Cleared Definition The number of VLANs on this switch that have been created and then deleted since the last reboot. The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch were last cleared. show mac-addr-table This command displays the forwarding database entries. These entries are used by the transparent bridging function to determine how to forward a received frame. Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to display the table entry for the requested MAC address on the specified VLAN. Enter the count parameter to view summary information about the forwarding database table. Use the interface parameter to view MAC addresses on a specific interface. Use the vlan parameter to display information about MAC addresses on a specified VLAN. Format Mode show mac-addr-table [{ | all | count | interface | vlan }] Privileged EXEC The following information displays if you do not enter a parameter, the keyword all, or the MAC address and VLAN ID. If you enter vlan , only the Mac Address, Interface, and Status fields appear. Term Mac Address Interface Definition A unicast MAC address for which the switch has forwarding and or filtering information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes. The port through which this address was learned. Utility Commands 527