Netgear M4100-26G CLI Manual - Page 665

ProSafe M4100 and M7100 Managed Switches Example: (switch) # (switch) #show accounting methods Acct Type ---------Exec Commands Commands Method Name -----------dfltExecList dfltCmdsList UserCmdAudit Record Type -----------start-stop stop-only start-stop Method Type -----------TACACS TACACS TACACS Line EXEC Method List Command Method List Console none none Telnet none none SSH none none HTTPS none none HTTP none none aaa authorization This command creates an authorization method list. This list is identified by "default" or a user-specified "list_name." If "tacacs" is specified as the Authorization method, Authorization commands are notified to a TACACS+ server. If "none" is specified as the Authorization method, command authorization is not applicable. A maximum of five Authorization Method Lists can be created for "commands" type. Note: Local method is not supported for command Authorization. Also note that command authorization with RADIUS works only if the applied authentication method is also radius. Format Mode aaa authorization {commands | exec } {default | } method1[method2] Global Config Term commands Exec default list-name method Definition Alphanumeric character string used to name the list of authorization methods. The default list of methods for authorization services. The default list of methods for authorization services. Alphanumeric character string used to name the list of authorization methods. TACACS+/RADIUS/Local and none are supported. Management Commands 665