Netgear M4100-26G CLI Manual - Page 65
Provisioning (IEEE 802.1p) Commands, Protected Ports Commands, interface
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
ProSafe M4100 and M7100 Managed Switches When the interface is specified:. Term Definition Voice VLAN Interface Mode The admin mode of the Voice VLAN on the interface. Voice VLAN ID The Voice VLAN ID Voice VLAN Priority The do1p priority for the Voice VLAN on the port. Voice VLAN Untagged The tagging option for the Voice VLAN traffic. Voice VLAN CoS Override The Override option for the voice traffic arriving on the port. Voice VLAN Status The operational status of Voice VLAN on the port. Provisioning (IEEE 802.1p) Commands This section describes the commands you use to configure provisioning, which allows you to prioritize ports. vlan port priority all This command configures the port priority assigned for untagged packets for all ports presently plugged into the device. The range for the priority is 0-7. Any subsequent per port configuration will override this configuration setting. Format Mode vlan port priority all Global Config vlan priority This command configures the default 802.1p port priority assigned for untagged packets for a specific interface. The range for the priority is 0-7. Default Format Mode 0 vlan priority Interface Config Protected Ports Commands This section describes commands you use to configure and view protected ports on a switch. Protected ports do not forward traffic to each other, even if they are on the same VLAN. However, protected ports can forward traffic to all unprotected ports in their group. Unprotected ports can forward traffic to both protected and unprotected ports. Ports are unprotected by default. Switching Commands 65