Netgear M4100-26G CLI Manual - Page 740

ProSafe M4100 and M7100 Managed Switches Cumulative Energy Saving (W * H XX Time Since Counters Last Cleared 1 day 20 hr 47 min 34 sec show green-mode Use this command to display green-mode configuration for the whole system. The status is shown only for the modes supported on the corresponding hardware platform whether enabled or disabled. Format Mode show green-mode Privileged Exec Table 58. Term Definition Energy Detect Energy-detect Config Energy-detect Admin mode is enabled or disabled Energy-detect Opr Energy detect mode is currently active or inactive. The energy detect mode might be administratively enabled, but the operational status might be inactive. EEE EEE Config EEE Admin Mode is enabled or disabled. Global Cumulative Energy Saving per Stack Estimated Cumulative energy saved per stack in (Watts * hours) due to all green modes enabled Current Power Power Consumption by all ports in stack in mWatts. Consumption per Stack Power Saving Estimated Percentage Power saved on all ports in stack due to Green mode(s) enabled. Unit Unit Index of given Stack member Green Ethernet Features supported List of Green Features supported on the given unit which could be one or more of the following: Energy-Detect (Energy Detect), Short-Reach (Short Reach), EEE (Energy Efficient Ethernet), LPI-History (EEE Low Power Idle History), LLDP-Cap-Exchg (EEE LLDP Capability Exchange), Pwr-Usg-Est (Power Usage Estimates). Green Ethernet Commands 740