Netgear M4100-26G CLI Manual - Page 646

ProSafe M4100 and M7100 Managed Switches ip http secure-protocol Use this command to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or to both TLS1 and SSL3. Default Format Mode SSL3 and TLS1 ip http secure-protocol [SSL3] [TLS1] Privileged EXEC show ip http Use this command to display the http settings for the switch. Format Mode show ip http Privileged EXEC Term Definition HTTP Mode (Unsecure) The unsecure HTTP server administrative mode. Java Mode The java applet administrative mode which applies to both secure and unsecure web connections. Maximum Allowable HTTP Sessions The number of allowable unsecure http sessions. HTTP Session Hard Timeout The hard timeout for unsecure http sessions in hours. HTTP Session Soft Timeout The soft timeout for unsecure http sessions in minutes. HTTP Mode (Secure) The secure HTTP server administrative mode. Secure Port The secure HTTP server port number. Secure Protocol Level(s) The protocol level might have the values of SSL3, TSL1, or both SSL3 and TSL1. Maximum Allowable HTTPS Sessions The number of allowable secure http sessions. HTTPS Session Hard Timeout The hard timeout for secure http sessions in hours. HTTPS Session Soft Timeout The soft timeout for secure http sessions in minutes. Certificate Present Indicates whether the secure-server certificate files are present on the device. Certificate Generation in Progress Indicates whether certificate generation is currently in progress. Management Commands 646