Netgear M4100-26G CLI Manual - Page 615
rmon event, no rmon hcalarm
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 615 highlights
ProSafe M4100 and M7100 Managed Switches Parameter Rising-Threshold Low Value Falling-Threshold High Value Falling-Threshold Low Value Rising/Falling/ Rising-Falling Owner String Description High capacity alarm rising threshold absolute value low. The lower 32 bits of the absolute value for threshold for the sampled statistics. High capacity alarm falling threshold absolute value high. The upper 32 bits of the absolute value for threshold for the sampled statistic. High capacity alarm falling threshold absolute value high. The upper 32 bits of the absolute value for threshold for the sampled statistic. High capacity alarm startup alarm that may be sent. Possible values are Rising Alarm, Falling Alarm or both. High capacity alarm owner. The owner string associated with the entry. no rmon hcalarm This command deletes the rmon hcalarm entry. Format Mode no rmon hcalarm Global Config rmon event This command sets the rmon event entry in the RMON event mib group. Format Mode rmon event [description|log|owner|trap] Global Config Parameter Event Number Event Type Description Event identifier The type of notification that the probe will make about the event. Possible values are: • None • Log • SNMP Trap • Log and SNMP Trap no rmon event This command deletes the rmon event entry. Format Mode no rmon event Global Config Utility Commands 615