D-Link DGS-6600-48T Product Manual - Page 178

DGS-6604 mm dot1x max-req dot1x max-req Use this command to set the maximum number of times that the switch sends EAP-request/identity frames to the client before restarting the authentication process. dot1x max-req TIMES Syntax Description max-req TIMES Number of times that the switch retransmits an EAP frame to the client before restarting the authentication process. The range is 1 to 10. Default Command Mode Usage Guideline Example TIMES: 2 Interface configuration This command is only valid for physical port interface. This example shows how to set the maximum number of retransmit times on port eth4.1 to be 3. Switch# configure terminal Switch(config)# interface eth4.1 Switch(config-if)# dot1x max-req 3 Verify the settings with the show dot1x auth-configuration command. CLI Reference Guide 168