D-Link DGS-6600-48T Product Manual - Page 369

DGS-6604 m keK y key KEY-ID key Use the key command to identify a key on a key chain used for routing protocol authentication. Use the no key command to remove the key from the key chain. no key KEY-ID Syntax Description KEY-ID The iIdentification number of an authentication key of a key chain. The available range for the key ID is a number from 0 to 2147483647, up to 32 key IDs can be configured. The key identification numbers need not be consecutive. Default Command Mode Usage Guideline There are no keys configured on the key chain. key-chain configuration Only Routing Information Protocol (RIP) Version 2 uses key chains. Using the key command will enter into the key-chain key configuration mode. It is useful to have multiple keys on a key chain so that the software can sequence through the keys as they become invalid over a period of time. This is based on the accept-lifetime, send-lifetime and key chain key command settings. If the last key expires, authentication will be invalid. If there was a discrepancy in the set time of the router's keys, the first valid key will be chosen. To remove all keys, remove the key chain with the no key chain command. CLI Reference Guide 359