D-Link DGS-6600-48T Product Manual - Page 494

DGS-6604 m port-channel load-balance port-channel load-balance Use port-channel load-balance to configure the load balance algorithm that the switch uses to distribute packets across ports in the same channel. To reset the load distribution to the default settings, use the no from of this command. port-channel load-balance {dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip | src-mac} no port-channel load-balance Syntax Description dst-ip Indicates that the switch should examine the IP destination address. dst-mac Indicates that the switch should examine the MAC destination address. src-dst-ip Indicates that the switch should examine the IP source address and destination address. src-dst-mac Indicates that the switch should examine the MAC source and destination address. src-ip Indicates that the switch should examine the IP source address. src-mac Indicates that the switch should examine the MAC source address. Default Command Mode Usage Guideline Example src-dst-mac Global configuration Use this command to specify the load balance algorithm. Only one algorithm can be specified. This example shows how to configure load balance algorithm for src-ip: Switch# configure terminal Switch(config)# port-channel load-balance src-ip Switch(config)# end Verify the settings by entering the show channel-group load-balance EXEC command. CLI Reference Guide 484