D-Link DGS-6600-48T Product Manual - Page 512

DGS-6604 m redistribute redistribute Use redistribute to redistribute routes from one routing domain into BGP. Use no command to disable route redistribution. redistribute PROTOCOL [route-map MAP-NAME] no redistribute PROTOCOL Syntax Description PROTOCOL Specifies the protocol whose routes are to be redistributed. It can be one of the following keywords connected, ospf, rip static. The static keyword means to redistribute IP static routes. route-map MAPNAME The connected keyword refers to routes that are established automatically by virtue of having enabled IP on an interface. (Optional) Specify the identifier of a route map used to filter the networks to be redistributed. If not specified, all networks are advertised. Default Command Mode. Usage Guideline Example Route redistribution is disabled. Router configuration Address family configuration Note: The user can use the command to redistribute prefix from different sources to BGP protocol. The following example redistributes the OSPF process routes into BGP process. Switch(config)# router bgp 8001 Switch(config-router)# redistribute ospf Switch(config-router)# end Switch# You can verify your settings by entering the show ip protocols bgp command. CLI Reference Guide 502