D-Link DGS-6600-48T Product Manual - Page 421

DGS-6604 m match ip address match ip address Use this command to define a clause to match the route based on IP standard access list. match ip address ACCESS-LIST-NAME no match ip address [ACCESS-LIST-NAME] Syntax Description ACCESS-LIST-NAME Specify a standard or an extended IP access list name. Default Command Mode Usage Guideline Example Not configured Route-map configuration Use the match ip address command in route map configure mode to define rule for matching routes against IP standard access list. The following example create an IP access list "myacl" first and create a route map entry to match against the create IP access list. Switch(config)# ip access-list myacl Switch(config-ip-acl) # permit 10.20.0.0 255.255.0.0 any Switch(config-ip-acl)# exit Switch(config)# route-map myPolicy permit 1 Switch(config-route-map)# match ip address myacl You can verify your settings by entering the show route map command. CLI Reference Guide 411