D-Link DGS-6600-48T Product Manual - Page 809

DGS-6604 m show lldp local interface show lldp local interface To display the each physical interface information, which will be carried in the LLDP TLVs and sent to neighbor devices, use the show lldp local interface command. show lldp local interface INTERFACE-ID [, | -] [brief | detail ] Syntax Description INTERFACE-ID , brief detail Display the currently available information to advertise LLDP for specific interface. Valid interfaces are physical interface (Optional) Specify a series of interfaces, or separate a range of interfaces from a previous range. No space before and after the comma. (Optional) Specify a range of interfaces. No space before and after the hyphen. (Optional) Display the information in brief mode. (Optional) Display the information in detailed mode. If neither brief nor detail is specified, display the information in normal mode. Default Command Mode Usage Guideline Example Not applicable EXEC mode or any configuration mode This command displays the each physical interface information currently available for populating outbound LLDP advertisements. If the advertising TLVs are classified as global information, e.g. System Name, use the command show lldp to get them. The following is sample output from the show lldp local interface command to display outbound LLDP advertisements for eth4.4 in detailed mode.: CLI Reference Guide 799